Turn the machine off, including the switch at the back and then turn it back on, holding the power button until you hear 3 beeps. That' ll factory re-set it.
Works great here try this also .
If the video output settings do not match those required for the TV in use, the screen may go blank when the resolution is changed. The screen should, however, automatically go back to its original resolution after a while. If the screen remains blank for more than 30 seconds, turn off the system. Then touch the power button on the system front for at least five seconds to turn the system on again. The video output settings will automatically be reset to the standard resolution.
When doing this make sure there is no video cables just try pluging it up with the power cable only then try the steps above.
look on page 10 under picture in your manual do what it says there
Not the quick reference guide but the actual manual.
That means a 2 hour drive back to galway. I just made that trip today. I want to keep my harddrive though.
Why just move your saved data to an removable jump drive. I do it all the time.
< Message edited by mikayd2 -- 28 May 07 1:56:48 >